1.2V NI-MH NI-CD: AAAA / AAA / AA / A / SC / C / D
Protected 20700 / 21700 batteries
Internal Resistance Testing
XTAR VC2SL can test the internal resistance of your batteries, and let you know if they are going bad.
Note :1. The charger doesn’t test battery internal resistance when the battery is fully charged and over-charged. 2. When the adapter input current is lower than 700MA, which is insufficient for internal resistance testing, it doesn’t either. The IR tested is meant to be taken as a reference only.
LCD Display
It’s easier for you to grasp the status of the battery through the LCD display. Pressing the button can switch the display: CAP (Cumulative mAH) – CCR (real-time charging current), and IR (internal resistance)
USB Power Bank Function
Can function as a power bank with one or two Li-ion batteries (it won’t do this with NiMH batteries).
The XTAR VC2SL can also function as a pass-through, so you can charge your phone AND batteries at the same time using this charger.
USB-C Input
Almost all phone charge cables these days are USB-C. With this VC2SL USB-C charger, you can use your phone’s and don’t need to take another cable.
XTAR VC2SL can charge at 2A for 1 cell, and 1A when charging 2 cells. BUT it adaptively adjusts the charging rate due to internal resistance and voltage.Also, a restricted USB supply like a standard PC USB would reduce the charging current.
Mutil Safe Assurance
With advanced MCU control and -∆V function, multiple protection like over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection, and multiple protection functions to ensure safer charging.
Features:
• USB Type-C port
• Compatible with 3.6/3.7V Li-ion and 1.2V Ni-MH batteries
• Can charge protected 21700 batteries
• Support charging current 1x2A, 2x1A, 2×0.5A
• Battery internal resistance test
• Portable power bank function
• Safe charging with multiple protections
Reviews
There are no reviews yet.